GTS Engineering is also strong in pipe works.

In our factory we assemble and do the prefabrication of pipes and installations.
The mounting and the piping we do on site. We deliver and install worldwide.

We work with all materials like:

• Steel pipes St35, St37, St52...
• Stainless pipes 1.4301, 1.4404, 1.4435...
• PE pipes and other plastics like PVC

all mediums like:

• Thermal oil
• Steam
• Hot water
• Pipes for beverages
• Heating of buildings
• Chemical installations
• Oil and Grease pipelines
• Hydraulic pipelines
• Cooling pipelines

GTS Engineering is able to deliver all the necessary mediums for a whole Fabrication plant, like Thermo oil, Steam, Cooling, Hydraulic, Ventilation, Climatisation...

Please ask: Contact

Installation of Pumps and  Distribution Pipes	Pipeline Extensions	Main Distribution with Secondary Regulation Units

For some processes, steam will be also needed.
We have a big range of different steam generators.
Please contact us for more information.

Steam Generator Thermo oil heated, capacity: 350 kg/h Working pressure: 2,5 barü 

GTS Engineering recommend injection regulation to minimize the temperature difference in the heat exchanger.
Specially recommended for the air heat exchangers.
A injection regulation consist of a primary circuit and a secondary circuit.
In this two hydraulic circuits are operating with different amounts of oil and different temperatures.

Example:
Heat requirement of the heat exchanger: 200 kW

In the secondary circuit, the temperature difference in the heat exchanger should be as small as possible.
With a temperature difference of 10 K and 180/170°C results a amount of oil circulation of 34,4 m3/h.

In the primary circuit with a temperature difference of 30 K and 240/210°C results a amount of oil circulation of 11,5 m3/h.

Operating principle:
If the consumer requires heat, the three-way valve opens and a amount of hot oil (240°C) will inject into the secondary circuit and
the same amount of oil leaves the secondary circuit.

Conclusion:

• very exact temperature regulation
• No big temperature differences in the heat exchangers, less tensions and leakages.

Coating machine	Press heated and cooled	Printing machine

Coating machine	Coating machine	Press heated and cooled

With a heat exchanger the customer has the possibility to integrate the heating of the building also in the thermal oil heating system.
Since the thermal oil heater undergoes during production hours, heating the building can be completely or partially covered with the thermal oil heating installation. In addition, by recovering the heat from the flue gases, hot water can be produced by heat exchangers.

See also heat recovery